Comparison Calculation Thick Pavement Rigid (Rigid Pavement) Between Method Manual Design Pavement Road (Revision 2017) With Method Build Clan Pd-T-14-2003, on Ruas Road Shell Until Limit City Land Grogot East Kalimantan
DOI:
https://doi.org/10.61132/ijmecie.v1i3.32Keywords:
Fly Ash, Sand and AC, WCAbstract
Roads are a means of transportation for supports various development sector and is a means of regional development of areas along the road the. By Because That, system transportation road kingdom is activity mover economy Which important beside Also become means activity resident Which involve problems economy, social And culture. Development road intended For make it easier connection from something regions to other regions, as well as to develop the economic potential that exists in area the. Objective from study this is For Plan Thick Construction Pavement Rigid With Manual Methods of Pavement Design Road 2017 and Methods Pd T- 14-2003 and compare both methods the. The thickness of the concrete slab obtained from the 2017 Road Pavement Manual method is of 28.5 cm with a thin concrete layer of 10 cm and a drainage layer with a thickness of 15 cm. The thickness of the concrete slab obtained from the Pd T-14-2003 method which is 18 cm. Based on the reinforcement calculation As Min > As Required then obtained reinforcement Which efficient For thick plate concrete 180 mmm is reinforcement 10 mm in diameter with a distance of 300 transverse and longitudinal reinforcement mm, transverse connection (Dowel) is required Ø 28 mm, with a length (L) of 450 mm and the distance (s) between dowels is 300 mm, while the longitudinal connection (Tie Bar) that is with Ø 16 mmm with long 700 mmm And distance 60 mmm. As well as Based on the calculation of reinforcement As Min > As Required, the reinforcement obtained is efficient for a concrete plate thickness of 265 mm is reinforcement with a diameter of 12 mm with distance between transverse reinforcement and longitudinal reinforcement 300 mm, transverse connection (Dowel) required Ø 32 mm, with a length (L) of 450 mm and a distance (s) between dowel 300 mmm, while the longitudinal connection (Tie Bar) is with Ø 16 mm with a length of 700 mm and a distance of 60 mm. Based on the comparison description calculation of rigid pavement thickness using the Manual Design Method Pavement Road (Revision 2017) with thick pavement rigid (rigid pavement) with Method Build Clan Pd T-14-2003 For use method MDPJ 2017 show will more thick compared to method PD Q 14 Year 2003.
References
Yoder, E. J., & Witczak, M. W. (1975). Principles of Pavement Design (2nd ed.). A Wiley-Interscience Publications, New York.
Totomihardjo, S. (2004). Material and Structure Road Raya. Yogyakarta: Bureau Publisher KMTS FT UGM.
Suryawan, A. (2016). Pavement Road Cement Concrete Portland (Rigid Pavement): Series Book Technique Civil Practical. Yogyakarta: Beta Offset.
Sukirman, S. (1999). Planning Basics Geometric Road. Bandung: Nova.
Shirley, L., & Hendarsin. (2000). Planning Technique Road Raya. Bandung: Polytechnic Country Bandung Major Technique Civil.
Rahman, M. A., & Surya, A. (2023). Analysis and solutions to traffic congestion on city roads (Case study of Jalan Sungai Andai – Padat Karya, Banjarmasin City) (Unpublished thesis). Muhammad Arsyad Al Banjari Islamic University, Banjarmasin.
Pratama, S. H. (2021). Study of the use of coal ash waste (fly ash) as a substitute for filler in AC-WC mixtures on Marshall test characteristics (Unpublished thesis). Mataram Muhammadiyah University, Mataram.
Huang, C., et al. (2005). Identification of an antifungal chitinase from a potential biocontrol agent, Bacillus cereus. Journal of Biochemistry and Molecular Biology, 38, 82-88.
Department of Public Works. (2008c). Indonesian National Standard 2417-2008, how to test aggregate wear with a Los Angeles abrasion machine. Jakarta: Department of Public Works.
Department of Public Works. (2008b). Indonesian National Standard 1970-2008, method for testing specific gravity and water absorption of fine aggregates. Jakarta: Department of Public Works.
Department of Public Works. (1990). Indonesian National Standard 03-1968-1990, test method for fine and coarse aggregate sieve analysis. Jakarta: Department of Public Works.
Department of Public Works. (1987). Instruction Planning Thick Pavement Rigid Road Raya with Method MDPJ 2017. Jakarta.
Department of Public Works, Directorate General of Highways. (2008). Instructions Rigid Highway Pavement Thickness Planning Austroads Method 1992, Pd T-14-2003.
Croney, D. (1977). The Design and Performance of Road Pavements. Transport and Road Research Laboratories, Department of The Environment, Department of Transport, Her Majesty's Stationery Office, London.
Basuki, H. (1986). Designing and plan field fly print second. PT ALUMNI, Bandung.
Aulia, R. N. (2022). Calculation of HRS-WC Asphalt Mixture Using Fly Ash (Unpublished thesis). Banjarmasin State Polytechnic, Banjarmasin.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 International Journal of Mechanical, Electrical and Civil Engineering

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.