PDCA-Based Improvement of Packing Systems to Reduce Double Handling and Downtime in Material Handling Operations
DOI:
https://doi.org/10.61132/ijmecie.v3i3.415Keywords:
Double Handling, Downtime, Material Handling, Occupational Safety, PDCAAbstract
An inefficient packing system can result in excessive material handling activities, increased downtime, and higher occupational safety risks. One of the major issues identified in manufacturing operations is double handling, which represents a non-value-added activity that negatively affects operational efficiency. This study aims to improve the packing system by reducing double handling activities, minimizing downtime, and enhancing workplace safety through the implementation of the Plan–Do–Check–Act (PDCA) methodology. Data were collected through direct observation, interviews, and documentation of material handling activities in the production area. Root cause analysis was conducted using a Fishbone Diagram integrated within the PDCA framework to identify the factors contributing to inefficiencies in the existing packing system. Improvement actions included direct pallet utilization, workplace layout optimization, and the addition of towing equipment to facilitate material movement. The results demonstrated significant improvements, with handling activities reduced by 66.7%, handling time reduced by 86.7%, and downtime reduced by 75%. Furthermore, occupational safety risks decreased substantially due to the reduction of manual handling activities. Process capacity also improved, as indicated by the increase in handling frequency from 32 to 240 times per shift. The findings confirm that integrating PDCA with material handling optimization effectively improves operational efficiency, reduces waste, and enhances workplace safety. This study provides practical insights for manufacturing companies seeking to develop more efficient and sustainable packing systems.
References
Antony, J., Sony, M., & Gutierrez, L. (2022). An empirical study into the limitations and emerging trends of Lean Six Sigma in manufacturing industries. The TQM Journal, 34(2), 257–276. https://doi.org/10.1108/TQM-10-2020-0244
Bhamu, J., & Sangwan, K. S. (2014). Lean manufacturing: Literature review and research issues. International Journal of Operations & Production Management, 34(7), 876–940. https://doi.org/10.1108/IJOPM-08-2012-0315
Bortolotti, T., Boscari, S., & Danese, P. (2021). Successful lean implementation: Organizational culture and soft lean practices. International Journal of Production Economics, 236, 108114. https://doi.org/10.1016/j.ijpe.2021.108114
Chiarini, A., & Kumar, M. (2021). Lean management and operational performance improvement: A systematic literature review. Business Process Management Journal, 27(6), 1731–1754. https://doi.org/10.1108/BPMJ-02-2021-0094
Deming, W. E. (1986). Out of the crisis. MIT Press.
Groover, M. P. (2016). Fundamentals of modern manufacturing (6th ed.). Wiley.
Kurniawan, F., & Putri, D. (2023). Analisis efisiensi sistem produksi dalam mengurangi pemborosan proses. Jurnal Teknik Industri, 5(2), 112–120.
Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. McGraw-Hill.
Neumann, W. P., Winkel, J., Medbo, L., Magneberg, R., & Mathiassen, S. E. (2021). Production system design elements influencing productivity and ergonomics. International Journal of Production Research, 59(5), 1451–1468. https://doi.org/10.1080/00207543.2020.1712491
Niebel, B. W., & Freivalds, A. (2009). Methods, standards, and work design (12th ed.). McGraw-Hill.
Nugroho, T., Santoso, B., & Hidayat, R. (2022). Implementasi metode Plan Do Check Act dalam peningkatan kualitas produksi. Jurnal Teknik Industri, 6(1), 25–32.
Ohno, T. (1988). Toyota production system: Beyond large-scale production. Productivity Press.
Pradana, R., & Darmawan, A. (2023). Analisis akar penyebab cacat produk menggunakan fishbone diagram pada proses produksi. Jurnal Rekayasa Industri, 8(2), 78–85.
Prasetyo, B., Hidayat, R., & Saputra, A. (2023). Evaluasi sistem material handling untuk meningkatkan efisiensi produksi. Jurnal Teknik Industri, 9(1), 34–42.
Rahman, M., Siregar, D., & Putra, A. (2024). Analisis peningkatan efisiensi produksi melalui pendekatan Plan Do Check Act. Jurnal Sistem Industri, 10(2), 55–63.
Santoso, E., Wibowo, A., & Pratama, D. (2023). Penerapan metode fishbone dan Plan Do Check Act dalam peningkatan kualitas produksi. Jurnal Rekayasa Industri, 8(1), 15–22.
Saputra, H., Nugraha, A., & Firmansyah, D. (2022). Pengendalian kualitas menggunakan fishbone diagram pada industri manufaktur. Jurnal Teknik Industri, 7(2), 66–73.
Siregar, D., & Hidayat, R. (2022). Analisis efisiensi proses produksi melalui perbaikan sistem kerja. Jurnal Teknik Industri, 6(2), 88–95.
Slack, N., Brandon-Jones, A., & Johnston, R. (2022). Operations management (10th ed.). Pearson.
Sundar, R., Balaji, A. N., & Kumar, R. M. S. (2014). A review on lean manufacturing implementation techniques. Procedia Engineering, 97, 1875–1885. https://doi.org/10.1016/j.proeng.2014.12.341
Tompkins, J. A., White, J. A., Bozer, Y. A., & Tanchoco, J. M. A. (2010). Facilities planning (4th ed.). John Wiley & Sons.
Tortorella, G. L., Fogliatto, F. S., Esposto, K. F., Vergara, A. M. C., Vassolo, R., & Sawhney, R. (2023). Effects of lean manufacturing implementation on operational performance: A longitudinal study. International Journal of Production Economics, 258, 108786. https://doi.org/10.1016/j.ijpe.2023.108786
Wibowo, A., Santoso, E., & Pratama, D. (2024). Eliminasi waste dalam sistem produksi menggunakan pendekatan lean manufacturing. Jurnal Teknik Industri, 10(1), 21–30.
Womack, J. P., & Jones, D. T. (2003). Lean thinking: Banish waste and create wealth in your corporation (2nd ed.). Free Press.
Yamashina, H. (2000). Challenge to world-class manufacturing. International Journal of Quality & Reliability Management, 17(2), 132–143.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Mechanical, Electrical and Civil Engineering
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
